How
the PetSafe Anti Bark Collars Work
PetSafe
anti bark collars has two primary features
designed to shorten the training phase and
promote good behavior. First, the anti bark
collar has a unique patented sensor that
provides the most reliable bark detection
available. PetSafe anti bark collars use
both vibration and sound sensors (dual-detection)
to discriminate each bark from other external
noises. A Static Correction is administered
through the Contact Points only if both
the vibration from the vocal chords and
the sound from the bark match the same criteria.
Second, anti bark collars have a new patent
pending Temperament Learning System design
that is effective across many dog breeds
and their individual barking behaviors.
The Temperament Learning System contains
software that tracks the number of corrections
needed to substantially reduce (and in most
cases eliminate) the number of nuisance
barks. The anti bark system has 10 levels
of Static Correction. It begins with low-level
corrections, however, if excessive barking
continues the correction intensity will
increase with each successive bark until
the barking stops. Once the dog has learned
to reduce the barking, the initial warning
corrections are reduced. If your dog does
not bark within 30 seconds, the anti bark
collar will reset itself. As a built-in
safety feature, if your dog barks 15 times
or more within a 1 minute 20 second period,
the anti bark collar will automatically
shut off for 3 minutes.
Important:
•
Before playing with your dog, remove the
anti bark collar. The activity may cause
your dog to bark, which could lead to him
associating the play with the Static Correction.
•
Never leave anti bark collars on your dog
for more than 12 consecutive hours.
Anti
Bark Collars
Click
To See ALL Dog Bark Collars
If
you have a dog, you have probably had a
barking problem at one time. PetSafe
anti bark collars are a great way to
stop barking dogs. Anti bark collars are
an effective training tool because it works
even when you aren't home to correct your
dog. PetSafe anti bark collars provide consistent
correction so your dog will learn that excessive
barking is unacceptable and will lead to
a static correction. Using anti bark collars
to control barking will train your dog to
only bark when necessary. The PetSafe PBC-10782
Nano anti bark collars are the smallest
anti bark collars made. It is great for
dogs from 8 pounds to 40 pounds.
Dogs
bark for a lot of reasons. Electronic anti
bark collars are not meant to stop all barking.
Some dog breeds are trained to bark while
performing some tasks like herding, hunting,
or guarding the homestead. This barking
is good and won't be discouraged. Barking
is not completely stopped; it is controlled.
If you wish to control when your dog is
allowed to bark, we offer Petsafe
training collars.
There
is more than one type of electronic anti
bark collars (click here
to see more anti bark collars). Some
anti bark collars respond to the vibrations
of a dog's vocal cords. Some anti bark collars
use a microphone that reacts to the noise
from the barking. A microphone can be sensitive
and may react to sounds other than your
dog's barking. Because of this sensitivity,
our PetSafe anti bark collars use both methods
to ensure that your dog is not being over-corrected
by the anti bark collar.
PetSafe
anti bark collars emits a mild static correction
when the dog barks. The correction from
an anti bark collars are similar to the
feeling you get when you slide your feet
on carpet and then touch something metal.
It is not harmful to your dog, but it certainly
gets the dog's attention. Our Nano anti
bark collars allow you to set the level
of correction that is appropriate for your
dog.
If
you don't want to give your dog static correction,
you can use an alternative anti bark collars.
citronella anti
bark collars correct the dog with a
strong burst of lemon scent spray. Because
dogs have a very strong sense of smell,
this lemon scent is especially annoying
to them. Your dog will be distracted and
will stop barking without any physical discomfort.
These anti bark collars are not for the
hard core barkers. They will need a static
anti bark collar.
 |
Petsafe anti bark collars are packaged with
the RFA-188 battery module installed
in the "OFF" position. To
activate the anti bark collar, use
a coin to turn the Battery Module
counterclockwise until the arrow lines
up with the "ON" position.
If the Petsafe anti bark collar is
not going to be used on the dog immediately,
leave it in the "OFF" position.
The PetSafe RFA-188 Battery was designed
to make battery replacement easier
and to keep the unit water proof.
To replace the battery, simply use
a coin and turn the battery module
to align the arrows and pull out.
|
*A branch of science and engineering devoted
to the design and production of extremely
small electronic devices and circuits built
from individual atoms and molecules.
